Gesucht nach VW | Passat Variant | 2.0 TDI 16V 4motion | 3C5

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ for front axle with alloy steering knuckle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
• ✓ brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shank length from the brake caliper for the screws 82mm)
• ✓ brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912

Clutch booster kit with new multi-plate discs for all DQ250 (02E) gearboxes, installed in e.g: Golf 5 Eos Beetle Passat Audi A3 TT and many more.

• ✓ optional direct installation

• ✓ complete brake system for front axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda u.v.m.
• ✓ Brake caliper: Porsche Cayenne 958 GTS Panamera brake caliper part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
• ✓ Brake Disc: MERCEDES-BENZ ML/GL-KLASSE 375x36mm Part Number: 166 421 0912

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ for Audi A3 S3 quattro, VW Golf MK5 3.2 R32 4 motion, etc.
• ✓ wishbone with steering bar/rod and screw set

• ✓ for rear axle: Audi TTRS, Passat, Audi Q3 series
• ✓ Brake callipers from Porsche Cayenne from rear axle part no: ( is written on the brake callipers, rear number differing right and left calliper) 955.352.421 + 955.352.422 (only 100% suitable with the specified Porsche callipers) Brembo left: 20.7673.03 right: 20.7673.04
• ✓ original brake calipers with carrier for handbrake from Audi TT partnumber: 1J0615423G / 1J0615424G carrier: 8J0615425G
• ✓ original Audi A6 A7 brake disc 356x22 mm part number: 4H0 615 601 F

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

Hexagonal nut M08
Thread right
Galvanized

• ✓ for front axle: VW Passat B6, Sharan, Audi A3 8P
• ✓ Audi e-tron 6 piston brake calipers part number: 9J1.615.123 / 9J1.615.124 / 4J3615123C / 4J3615124C
• ✓ Brake discs from Audi A6 4G 400x38mm part number: 4H0 615 301 AL / 4H0 615 301 T

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ Zimmermann brake disc 310x22 Manufacturer's ref. 100.3309.52
• ✓ VW Golf MK5 MK6 MK7 Audi A3 TT Seat Leon Skoda Superb 2

• ✓ thinner and 1 cm shorter drive shaft for Audi A3, Sportback, Q3, VW Golf 5, 6, 4-motion, Passat 3c, Skoda Octavia 2, 3 Combi, Superb 2

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ fine thin short drive shaft, right, for VW Golf MK4 R32, Audi TT 8N Quattro. Low-profile vehicle.

• ✓ Zimmermann Sport Brake Disc 345x30 Manufacturer's ref. 100.3301.52
• ✓ Suitable for: Audi A3 S3 2.0 TDI quattro VW Golf 5 6 GTI

• ✓ for front axle with aluminium stub axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
• ✓ Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
• ✓ Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212

• ✓ for front axle: VW Passat B6, B7, B8, CC, Sharan, ...
• ✓ brake caliper: Audi RS7 A7 RS5, reference 4H0615107D / 4H0615106D
• ✓ brake disc: ceramic Audi RS5 400x38mm, reference 4K0615302D

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized

Zinc-plated press-in nut M06 with right hand thread