Gesucht nach BMW | 3er | M3 3.2 | E36
- ✓ steering angle limiter / turning angle reducer suitable for all BMW E30 and E36
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ repair plate kit for rear axle on model 3th BMW E36
- ✓ for BMW E36 and E46
- ✓ for conversion to turbocharger
- ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4
- ✓ repair / reinforcing plate kit for the control / trailing arm (rear axle), on model 3th BMW E36
- ✓ for front axle: BMW E36
- ✓ brake caliper: Porsche Boxter S, reference left 996.351.425 + right 996.351.426
- ✓ brake disc: BMW E46 M3 CSL 345x28 mm
- ✓ for front axle of BMW E36 M3
- ✓ brake caliper: BMW Performance 6 piston from 135i , reference: left 34116786741 ; right 34116786742
- ✓ bracke disc: BMW E46 M3 CSL front axle 345x28mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ for rear axle: BMW E36 M3
- ✓ brake caliper: Porsche 986 rear, reference : 986.352.422 + 986.352.421
- ✓ brake disc: BMW E46 M3 rear 328x20mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for front axle: BMW E36, E36 M3
- ✓ brake caliper: Porsche Boxter S, reference: left 996.351.425 + right 996.351.426
- ✓ brake disc: BMW E46 M3 CSL 345x28 mm
- ✓ for e.g. VW BMW E36 E30 Z3 etc.
- ✓ Connection 1 M10x1 external thread 45° bent
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 60cm long / Transparent sheathed Syncro
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ for front axle: BMW E36, Z3
- ✓ brake caliper: BMW E38 Brembo 4-piston, reference Left 34 11 1 163 757 right 34 11 1 163 758
- ✓ brake pads: BMW E38 Brembo 4-piston, reference 34 11 6 761 254
- ✓ brake disc: BMW E46 M3 325x28 mm, reference left 34 11 2 282 801 right 34 11 2 282 802
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ assembly position: rear
- ✓ suitable for BMW M3, 520, 525, 7er, 5er, 3er
- ✓ assembly position: rear
- ✓ suitable for BMW 3er, 5er, 7er, Z3, M3, V8, V12
- ✓ assembly position: rear
- ✓ suitable for BMW 3er, 5er, 7er, Z3, M3, V8,V12, Alpina
- ✓ assembly position: front
- ✓ suitable for BMW, M3, 520, 525, 7er, 5er, 3er, Z3