Gesucht nach BMW | 3er Cabriolet | 330 Ci | E46

• ✓ for all BMW with M50 M52 and M54 engines installed in:
  • ✓ BMW 3 Series 320i 325i 323i 328i ( E36 )
  • ✓ BMW 3 Series Compact 323ti ( E36 )
  • ✓ BMW 3 series coupe 320i 323i 325i 325is 328i ( E36 )
  • ✓ BMW 3 series convertible 320i 323i 325i 328i ( E36 )
  • ✓ BMW 3 Series Touring 320i 323i 328i ( E36 )
  • ✓ BMW 3 Series 320i 323i 325i 325xi 328i 330i 330xi ( E46 )
  • ✓ BMW 3 Series Compact 325ti ( E46 )
  • ✓ BMW 3 Series Coupe 320Ci 323Ci 325Ci 328Ci 330Ci 330xi ( E46 )
  • ✓ BMW 3 Series Convertible 320Ci 323 Ci 325Ci 330Ci ( E46 )
  • ✓ BMW 3 series Touring 320i 325i 325xi 328i 330i 330xi ( E46 )
  • ✓ BMW 5 series 520i 523i 525i 528i 530i ( E39 )
  • ✓ BMW 5 series Touring 520i 523i 525i 528i 530i ( E39 )
  • ✓ BMW 5 series 520i 24V 525i 24V 525ix 24V ( E34 )
  • ✓ BMW 5 series Touring 520i 525i 525ix ( E34 )
  • ✓ BMW 5 series 520i 525i 530i ( E60 )
  • ✓ BMW 5 series Touring 525i ( E61 )
  • ✓ BMW 7 series 728i,iL ( E38 )
  • ✓ BMW 7 series 730i, Li ( E65 E66 )
  • ✓ BMW Z3 2.0i 2.8i ( E36 )
  • ✓ BMW Z4 2.2i 2.5i 3.0i ( E85 )
  • ✓ BMW X3 2.5i 3.0i xDrive ( E83 )
• ✓ Total weight: 5,8 kg / Savings compared to original: 6,2 kg

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4

• ✓ for front axle: BMW E46 / E85 / Z4
• ✓ brake caliper: for 135i reference 34 11 6 786 741
• ✓ brake disc: for BMW E45 M3 reference 3411 2 282 445

• ✓ flywheel kit consisting of lightened flywheel, spring sinterpad clutch disc and pressure plate with reinforced design
• ✓ suitable for M50, M52 and M54 engines with 240mm clutch, in models BMW 125i 130i 325i 330i 530i, etc

• ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more

• ✓ Flywheel kit consisting of lightened flywheel, spring-loaded sinterpad clutch disc and pressure plate in reinforced design
• ✓ Suitable for all M50, M52 and M54 engines with 228mm clutch, installed in the BMW 125i 130i 325i 330i 530i, and many more

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ rubber bushes for BMW E36 E46 and Z1 camber adjustable rear axle
• ✓ rubber bushings bushings already pressed in / ready to use

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ 1x clutch release lever / fork for BMW series 3 E46 E90

• ✓ reinforced  aluminium axle bearing for the rear axle on models  BMW E46 and Z4 E85 E86

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ for e.g. VW BMW E36 E30 Z3 etc.
• ✓ Connection 1 M10x1 external thread 45° bent
• ✓ Connection 2 M10x1 female thread straight
• ✓ Length 60cm long / Transparent sheathed Syncro

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

Hexagonal nut M08
Thread right
Galvanized

• ✓ for rear axle: BMW E46
• ✓ brake disc: rear BMW E46 M3, 328x20mm, reference 34212282303 oder 34212282304
• ✓ brake caliper: Porsche 986, reference  986.352.421 / 986.352.422, or reference  996.352.421 / 996.352.422

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized

Zinc-plated press-in nut M06 with right hand thread

Hexagon thin nut M08
Thread left
Galvanized

• ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material

• ✓ 4-piece PU bushing kit for the front axle housing bearing on the rear axle of the BMW E46
• ✓ BMW 33316770784, BMW 33311092516, BMW 33316757394

• ✓ 4-piece PU bushing kit for the rear axle housing bearing on the rear axle of the BMW E46
• ✓ BMW 33 31 6 770 783, BMW 33 31 1 092 515, BMW 33 31 6 757 393

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ Installation location: front
• ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford

• ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
• ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire

• ✓ Zimmermann brake disc 370x32 Manufacturer's ref.  100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
  
• ✓ Audi TT
• ✓ Seat Leon

• ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
• ✓ Golf 4 R32