Gesucht nach VW | Caddy III Großraumlimousine | 1.9 TDI | 2CB, 2CJ, 2KB, 2KJ
- ✓ for rear axle: Golf MK5 Mk6, Audi S3 8P Seat Leon Cupra Altera
- ✓ brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche caliper) Brembo left 20.7673.03 / right 20.7673.04
- ✓ rear brake caliper for handbrake: Golf MK5 R
- ✓ brake disc: original Golf 5 R 310x22 mm , reference 1K0 615 601 N
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and more.
- ✓ brake caliper: Porsche Cayenne or VW Touareg reference. 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Mercedes 5x112 PCD 350x32mm reference : 164 421 05 12 + A 164 421 05 12
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓
for front axle VW Golf MK5 MK6 Audi A3 series
- ✓
brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03)
- ✓
brake disc: MERCEDES-BENZ GL-KLASSE 375x36mm reference 166 421 0912
- ✓ for rear axle: Golf MK5, MK6, MK7, Scirocco 3, Passat
- ✓ brake caliper: original
- ✓ brake disc: Audi A6 356x22 mm reference : 4H0 615 601 F
- ✓ for front axle: VW Golf MK5 MK6 Audi A3 Seat Leon, etc
- ✓ brake caliper: Renault Megane 3 RS, reference 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R
- ✓ brake disc: Golf MK5 MK6, 5x112 bolt circle/PCD) 345x30 mm, manufacturer reference VW Audi: 1K0 615 301 AB , 1K0 615 301 M
Clutch booster kit with new multi-plate discs for all DQ250 (02E) gearboxes, installed in e.g: Golf 5 Eos Beetle Passat Audi A3 TT and many more.
- ✓ optional direct installation
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and more.
- ✓ brake caliper: Porsche Cayenne or VW Tuareg (17 inch version) , reference 7L6 615 123 T and 7L6 615 124 T
- ✓ brake disc: Mercedes 5x112 PCD 330x32mm, reference 164 421 05 12 + A 164 421 05 12
- ✓ for front axle: Golf MK5 MK6 Audi B5 S4
- ✓ brake caliper: Audi R8 8-piston original Brembo brake caliper, reference left: 8E0615107 , right 8E0615108
- ✓ brake disc: Audi RS3 370x34 , reference 8V0.615.301.P
- ✓ for rear axle: Golf MK5 MK6 Audi A3, etc.
- ✓ brake caliper: Porsche Cayenne, rear, reference 955.352.421 + 955.352.422 , Brembo left: 20.7673.03 right: 20.7673.04
- ✓ brake caliper mounting bracket for hand brake: Golf 5 R, rear
- ✓ brake disc: original Audi RS7 356x22 mm , reference 4G8615601 4G8615601E
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓
for Front Axle; VW Golf MK5 MK6 Audi A3, etc
- ✓
brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03)
- ✓
brake disc: Mercedes Benz GL - Klasse 390x36mm , reference : 166 421 0512
- ✓ drive shaft for VW Golf MK5, MK6, for lowered vehicles
- ✓ for front axle: Golf MK5, MK6 Audi A3 8P
- ✓ bracke caliper: Audi TTRS , reference : left 8J0 615 107 + right 8J0 615 108
- ✓ brake disc: Mercedes 350x32 , reference : 164 421 0512 + 164 421 1412
- ✓ brake pad: reference 8J0 698 151 E
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ for the steel front axle on : VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more.
- ✓ Brake calipers Porsche Cayenne 958 GTS Panamera Part number: 7PP615149J / 7PP615150J (caliper rod length for screws 82mm)
- ✓ Brake discs Mercedes Benz ML / GL - class 375x36mm Part number : 166 421 0912
- ✓ kit for lowering / low-profile vehicles, for hi-riser / lifting / elevating . 6-step. Rear axle des Caddy 3 with 4 plates and all mounting screws
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ fine thin drive / transmission shaft VW Golf MK5 Mk6 series, lowered vehicles.
- ✓ complete brake system for front axle: Audi A3 (8L), Audi TT (8N), VW Golf 5, Golf 6, Skoda Octavia, Seat Leon etc.
- ✓ brake calliper: Porsche Cayenne ZR18 / ZL18 part no. 955.351.421.50 / 955.351.422.50
- ✓ Brake disc: Mercedes 5x112 bolt circle 350x32mm part no. 164 421 05 12 + A 164 421 05 12
- ✓ for front axle: Golf MK5, MK6 Audi B5 S4
- ✓ brake caliper: Audi R8 8 piston, left reference: 8E0615107 ; right reference: 8E0615108
- ✓ brake disc: Audi RS4 B5 360x32 mm reference : 8D0615302B / or RS4 B7 brake disc 365x34mm reference 8E0615301AB
- ✓
VW Golf MK5 / MK6
- ✓
Golf Plus
- ✓
Jetta 4
- ✓
Audi A3 (8P)
- ✓
Seat Leon (1P1)
- ✓
Seat Altea
- ✓
Seat Altea XL
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ complete brake system for front axle: VW Golf 5 6 Audi A3 series
- ✓ Brake caliper: Porsche Panamera part number : 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03)
- ✓ Brake disc: MERCEDES-BENZ GL-KLASSE 375x36mm Part Number: 166 421 0912
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ for e.g Audi RS3 8V VW Golf 7, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 23cm / transparent covered
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M16x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more.
- ✓ Porsche Cayenne 958 GTS Panamera brake callipers part number: 7PP615149J / 7PP615150J (shaft length of the brake calliper for the screws 82mm)
- ✓ Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagonal screw high resistance entirely thread
Type: M10x20
Thread: 1.25
Blank
Quality: 10.9
- ✓ stylish fan EPYTEC sticker white for e.g. rear window or body
- ✓ size: 155x33mm (width x height)
Hexagonal screw entirely thread
Type: M06x30
Galvanized
Quality: 8.8
Hexagonal countersunk socket screw high resistance
Type: M10x16
Blank
Class 10.9
- ✓ cross-head countersunk screw
- ✓ size:M06x16
- ✓ alloy: galvanized
- ✓ strength class 8.8
Hexagonal screw high resistance entirely thread
Type: M16x40
Thread: 1.5
Galvanized
Quality: 10.9
Hexagonal socket head cap screw entirely thread
Type: M12x35
Stainless steel (V2A)