EBC brake discs 347x30 Black-Dash front axle Audi A6 Avant Allroad 3.2 FSI 2.7 TDI 3.0

Brake caliper adapter to use Porsche 6-piston calipers from the Porsche Cayenne (18 inch) part number 955.351.421 / 955.351.422, in conjunction with the brake discs from the A8 A6 S8 with the dimensions 347x30 part no. 4F2 4F5 PR 1ZL these only have to be attached to the centering can be adjusted. Perfect fit for all Omega A B. With wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra struts to mount. Relatively low conversion effort for enormous braking power Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. tipps und tricks: The Audi brake disc fits despite the different bolt circle of 5x112 because there are M14 holes in the brake disc. The brake disc only has to be turned to the centering diameter from 68mm (Audi) to 70mm (Opel). This means the disc is perfectly centered 8can also be done in-house. Info: The pre-facelift wheel hubs are larger in diameter than the facelift wheel hubs, so they either have to be turned off in the outer diameter or the facelift wheel hubs with wheel bearings must simply be used. The included bushings are optional because there were two different axle types, but in most cases they are not required. Scope of delivery: 2 x caliper adapters Set of high-strength screws materials certificate Stress analysis for better registration

Brake caliper adapter, front axle, on model T3 bus/transporter for conversion to auf  internally ventred 347x30mm brake discs, combined with the Audi A6 brake calipers. Advantages: top deceleration the system no longer warms up and no more fading very cheap components.  thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A6 347 x 30 mm, reference 4F0615301G brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference  8E0615124B wheel hubs to center around the brake disc are also available in our shop only fitting with the 14 inch axle of the T3 (to determine at the caliper mounting screw, this must have 16mm thread) Rims: at least 16 inch Delivery: 2x brake caliper adapters, front axle, VW T3 bus/transporter/van high-strength mounting screws material certificate Installation instructions

Brake caliper adapter, front axle, on model T3 bus/transporter for conversion to auf  internally ventred 347x30mm brake discs, combined with the Audi A6 brake calipers. Wheel hubs are supplied with this brake conversion, which retain the standard VW bolt circle /pitch circle (5x112) and are dimensionally identical. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Advantages: top deceleration the system no longer warms up and no more fading very cheap components.  thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws The wheel hubs supplied retain the standard VW bolt circle/pitch circle and are identical to the original dimensions. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Required components: brake disc: Audi A6 347 x 30 mm, reference 4F0615301G brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference  8E0615124B wheel hubs to center around the brake disc are also available in our shop only fitting with the 14 inch axle of the T3 (to determine at the caliper mounting screw, this must have 16mm thread) Delivery: 2x brake caliper adapters, front axle, VW T3 bus / transporter / van high-strength mounting screws material certificate 2 x required wheel hubs matching centering rings