EBC brake discs 280x22 Black-Dash front axle Seat VW Toledo I Corrado 2.0i 16V 2.9 VR6 2.0

Brake caliper adapter, rear axle, on various VW and Seat models, for conversion to rear brake caliper from Porsche 996, combined with the front brake discs VR6 280mm . Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item No 313 in our shop) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The brake caliper adapter are mounted between the axle beam and the axle stub. The necessary screws are supplied.  With our hub spacers ( not supplied in this kit , and available with 4 or 5 holes according to the model) , the 280 mm brake discs are centered and screwed (in our shop you will find the complete kit). The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we propose brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 2x special wheel hubs with which the VR6 disk can be exactly mounted depending on the model, the 4 or 5 hole wheel hubs are available. With 4 holes, the brake discs have to be modified. (click here) brake disc: VR6 , VAG reference : 357698151C Delivery: 2x brake caliper adapters high strength mounting screws material certificate This kit is only for the circuit since there is no cable handbrake.We have the same kit also with handbrake function under the item No 678 in the shop.

Brake caliper adapter, rear axle,  for Golf MK3, Corrado, Syncro to install the brake calipers of Golf MK4 V6/R32 , Audi S3 8L, YoC 99, combined with the front brake discs 280mm VR6 . Suitable for the following models of VW and Seat, with Syncro axles: Golf  MK3  Syncro Corrado Syncro Passat 35i  Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs thanks to the internally vented discs, a better fading better performance thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles For the front axle, we have in our shop brake caliper adapters for conversion to Porsche brake system, combined with R32 brake discs . Visit our shop. Required components: brake caliper:VW Golf R32 V6 oder S3 VW , reference  left 8N0615423C  , right 8N0615424C brake caliper mounting bracket: reference 8N0615425B brake disc: Passat 35i VR6 , reference 1H0615301, 280 mm Due to high customer demand, our adapters are supplied in the color black, which is applied with the GNC-OX nitrating process. This process guarantees the best mechanical-dynamic properties against wearing out. Delivery: 2x brake caliper adapters complete screw kit material certificate stress analysis

Bremssattel Adapter mit speziellen Radnaben für Fahrzeuge mit 4x100 oder 5x100 Lochkreis um die hinteren Bremssättel vom Porsche 996 in Verbindung mit den vorderen 280mm Vr6 Vorderachs Bremsscheiben an der Hinterachse zu fahren Adapter sind passend für folgende VW und Seat Modelle: Golf 1 ( nur in Verbindung mit unseren Achszapfen (Artikel Nr: 313 die wir im Programm haben) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Vorteile dieser Bremsanlage: Top Verzögerungswerte , kein Vergleich zu den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Technik: Die Bremssattel Adapter werden zwischen Achskörper und Achszapfen montiert. Die dafür benötigten längeren Schrauben sind im Lieferumfang enthalten. Mit Hilfe unserer Radnaben (im Shop haben wir auch einen Komplett Kit mit S3 Sättel für die Handbremsfunktion, welchen wir empfehlen) werden die 280mm Bremsscheiben zentriert und angeschraubt.Die Spur wird um ca 16 mm pro Seite breiter. Die Radnaben sind an der Lagerinnenseite baugleich wie die Originale.Daher können die Original- radlager weiterverwendet werden.Nicht im Bereich der STVO zugelassen, durch das im Lieferumfang enthaltene Materialzertifikat kann jedoch eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werdenPassend für die Vorderachse bieten wir Ihnen Bremssatteladapter für eine Umrüstung auf die Porschebremsanlage in Verbindung mit der R32 Bremsscheibe an. Schauen Sie in unserem Shop. Bei Fahrzeugen mit ABS kann der ABS Ring von allen 3er Golf Modellen passgenau an unsere Radnaben übernommen werden. Benötigte Komponente: Porsche Bremssattel Teile Nr: 996.352.421 + 996.352.422 Lieferumfang: 2 spezielle Radnaben mit 4x100 Lochkreis 2 Stück Bremssattel Adapter hochfestes Befestigungsschrauben Material Materialzertifikat

Brake caliper adapter on rear axle for conversion to rear brake caliper of Porsche 996, combined with the 280 mm  VR6  front brake discs. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following vehicles: Ibiza 6L Polo 9N Audi A1 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate can always be restored to the original state without any problems Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The track is wider by about 16 mm per side. Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. For the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS can be used. Required components: brake caliper Porsche 996  reference  996.352.421 + 996.352.422 brake caliper Golf 4 R32   VW reference  left  8N0615423C + right 8N0615424C brake caliper mounting bracket:  VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F brake disc: VR6 GTI 16V  280mm with cup depth 28.5mm VAG-reference: 1H0615301 and VAG-reference 1H0615301A  Delivery: 2x brake caliper adapters for conversion to Porsche 2x brake caliper adapters for installing  S3 /R32 handbrake caliper  high strength mounting screws material certificate

Brake caliper adapters with special hub / hub adapter for vehicles with 5x100 or 4x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, combined with the front 280mm G60 GTI 16V brake discs on the rear axle.In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32 front 280mm brake discs from VR6. Total height: 28,5mm VAG reference : 1H0615301 brake disc PCD habe to be modified to 4x100 (service available from EPYTEC) Delivery: 2x special hubs / hub adapters with 5x100 or 4x100 PCD 2x brake caliper adapters high strength mounting screws material certificate

Brake caliper adapter with tailor-made wheel hub for rear axle brake system.For fixation of brake discs diameter 280mm from G60 VR6 GTI 16V normally used on front axle in combination with standard brake calipers from Golf 4 V6/R32 or Audi S3 8L year 99. Adapters are tailor-made for the following vehicles: Golf 1 (only after installation of our tailor-made pivot,that you can find in our product range) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Depending on the vehicle the wheel hub will be delivered with 4 or 5 fixation holes.If you also need wheel hubs, we recommend ordering the complete set directly article 344There are 2 different installation positions for the brake caliper adapter, depending on which brake disc is installed. Advantages: Significantly better perfomance than the standard brake system. must have when increasing performance. Material certificate is included Inexpensive procurement of spare parts The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles  Technical information: The 280 mm brake discs are centered and screwed on with our wheel hub (available in 4 and 5 holes depending on the model). The track widens by about 6-8mm per side. The wheel hubs are identical to the originals on the inside of the bearing. The original wheel bearings can therefore continue to be used. Suitable for the front axle, we offer you brake caliper adapters for conversion to the Porsche brake system in connection with the R32 brake disc. Look in our shop. Required components: Brake caliper left VW part number 8N0615423C, brake caliper right VW part number 8N0615424C, brake caliper bracket VW part number 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F. Brake disc: if 5 holes are driven: Golf 3 VR6 brake disc 280x22mm VW part number 1H0615301A pot depth 29mm when driving 4 holes: Golf 2 G60 brake disc 280x22mm VW part number 535615301 pot depth 40mm Scope of delivery: 2 high resistant adapter-plates  high-strength screw material Certificate of material  Stress analysis / FEM calculation for entry  In this kit the whell hubs are not included. See article nr.344