You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

6-gear Gearbox cradle for gearbox 02M on Golf Passat Corrado G60 16V Vr6 Gearbox Cradle Engine

€168.07*

Available
Delivery by Wednesday, 15.05.2024 if you order within the next 15 Hours.
Product number: 542
Weight: 3.355 kg

Gearbox holder to mount the 02m 6-speed gearbox from the R32 in conjunction with the VAG 4 cylinder engines, 16V 1.8T 1.9TDI in the Golf 1 Caddy 14d Scirrocco etc.!

Due to the sturdy construction (6mm high quality steel ST52) and the accuracy of fit, the transmission mount can be attached to the original bracket, which means that a snug fit of the transmission can be guaranteed. This means that no welding is required on the body, saving you a lot of time during the rebuild.

The transmission mounts are supplied galvanized therefore best corrosion protection.

Scope of delivery:

  • 1x transmission mount on 02M / R32 V6 1.8T 6-speed transmission when converting to 4 cylinder engine
  • 1x Gearbox holder below rear
  • Material certificate

27 of 27 reviews

4.85 out of 5 stars


93%

0%

7%

0%

0%


Leave a review!

Share your experiences with other customers.


12 January 2024 23:25

Lukas R

montaz je teprve prede mnou,ale verim ze vse bude perfektne sedet jako vzdy u vyrobku od epytec.zpracovani jako vzdy TOP,ceny prijatelne

11 November 2023 09:18

Stanislav T

I wouldn't leave any placement marks unwelded.

22 October 2023 10:40

Christian H

Super verarbeitet, sehr kompetentes Team und steht bei Fragen zur Stelle. Immer wieder gerne

22 October 2023 09:52

Christian H

Super verarbeitet, sehr kompetentes Team und steht bei Fragen zur Stelle. Immer wieder gerne

3 September 2023 08:47

Péter G

Speciális, pontos , rengeteg időt sporoltam!

26 February 2021 08:37

Maik B

Alles super

27 January 2021 19:01

Marcel R

Qualitativ hochwertig verarbeitet und das zu einem guten Preis

6 September 2020 21:28

Stephane F

Bonne pièces , bonne qualité, plug and play 👍🏻

6 September 2020 10:10

Stephane F

belle pieces , conforme a la description , montage plug and play et resultat parfait

5 September 2020 23:16

Stephane F

Produit de bonne qualité et conforme à la description, sinstalle sans problème

  • Why does the transmission mount not fit on my 02m transmission?
  • If the transmission mount does not fit the mounting points of your 02m transmission, the problem is this: You have the 02m transmission from a Seat Ibizia, Fabia or VW Polo. These 02M transmissions are relatively rare and the mounts are different than the 02M transmissions used in the VW Golf, Audi A3, etc. The easiest and cheapest way is to get the 02m gearbox from a Golf or Audi, then our gearbox holder will fit perfectly.

Passendes Zubehör

VW Golf 1 Caddy Scirocco G60 GTI ABF Modification Motor cradle Turbo Motor holder Motor exchange

Motor cradle for engine exchange.For installation of G60 engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.

€38.11*
Artikelnummer: 308
%
Engine bracket Golf Scirocco Caddy 1 Rubber Gearboc cradle Motor holder PU Shore 65-70

High resistant rubber bearing kit for engine and gearbox.For installation on Golf 1. Perfect for motor conversion on VR6 or V16 engine.

€73.64* €86.63* (14.99% saved)
Artikelnummer: 445
VW Audi 02M 6 Speed Transmission Gearbox Reinforcing Plate Golf 1 2 3 4 VR6 R32 S3
  • ✓ gearbox reinforcement / reinforcing plate for all 02M 02Q 6 speed gearboxes  

€31.78*
Artikelnummer: 705
6 Speed Manual Gearbox Conversion Kit 02M 4motion VR6 R32 Golf MK1 2 3 4 Turbo
  • ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.

€112.08*
Artikelnummer: 698
VW Golf Caddy Scirocco Motor cradle 1,8T AGU Modification Turbo Motor holder Motor exchange

Motor cradle for engine exchange.For installation of 1,8T engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.

€41.99*
Artikelnummer: 389
7-speed VW Tiguan Audi Q3 2.0TDI DQ500 02M Gearbox 4WD conversion 2WD Front WD Golf MK1 MK2 MK3 MK4 Turbo
  • ✓ conversion kit for 7-speed 4Motion 4WD gearbox to convert to 2WD front-wheel drive. Thus, the 7-speed 02M transmission can be installed in all front-wheel drive vehicles

€168.51*
Artikelnummer: 880
VW Audi 02M 6-Speed Transmission Gearbox Reinforcing Plate Bracket Angle Drive
  • ✓ reinforcing bracket / plate made of high-strength  S355 steel
  • ✓ VW Audi 02M 6-speed gearbox, angle drive

€116.85*
Artikelnummer: 836
Golf MK1 Caddy Scirocco Conversion Gas Pedal Accelerator Adapter Trottle Control for Golf MK4 DBW R32 V6 TDI Accelerator Cable
  • ✓ gas pedal / accelerator pedal adapter / trottle control adapter
  • ✓ Golf MK1 Caddy Scirocco 

€53.39*
Artikelnummer: 871
Adapter Ring for Golf 3 Polo 9N Hub ABS Conversion Mark 20 for R32 Brake System Rear
  • ✓ adapter ring for the  Polo 9N wheel hub
  • ✓ ABS Sensor ring Mark 20 from Golf MK4 can be taken over

€39.77*
Artikelnummer: 903
Drive Shaft VW Golf MK1 Scirocco Jetta Caddy G60 VR6 Conversion Front Wheel Drive 02M 02Q DQ250 6-speed
  • ✓ Drive shaft set for VW Golf 1, Scirocco Jetta 1 Caddy 14D with the narrow axle .Stable up to 800 hp.

€544.88*
Artikelnummer: ISP107
Tension Pulley Adapter Socket VW Golf Caddy Scirocco Engine 1,8T AGU 20V 1,9 TDI BAM AGU Conversion
  • ✓ tension pulley adapter for VW Golf MK1 Caddy 1,8T / 2,0 16V AGU, etc. Engine conversion.

€26.99*
Artikelnummer: 939
Engine Mounting Bracket Golf MK2 MK3 Corrado Conversion 4 Motion 1,8T 16V TDI Engine Mount 4WD 02M 02Q Gearbox
  • ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento

€98.95*
Artikelnummer: 934
Conversion Kit for VW Golf 1 Caddy Scirocco Umbausatz to Hydraulic Clutch Engine Conversion 1,8T Golf 4
  • ✓ conversion kit to hydraulic clutch Golf MK4
  • ✓ suitable for VW Golf 1, Caddy 14D, Scirocco  usw.

€168.14*
Artikelnummer: 977
VW Golf 1 2 Caddy Scirocco 16V Engine Conversion Engine and Gearbox Mounting Bracket 055199293G
  • ✓ for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • ✓ engine: 16V engine from,e.g., Golf MK2
  • ✓ manufacturer reference: 055199293G

€68.72*
Artikelnummer: 462
Lightened Flywheel VW Golf MK4 R32 02M Transmission light steel
  • ✓ e.g. VW Golf MK4 R32
  • ✓ total weight: 5,2 kg / saving weight compared to the original:: 6,8 kg

€224.83*
Artikelnummer: 633
Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Rear Golf MK1 Scirocco Caddy Jetta 171 399 151A Shore Hardness 68
  • ✓ reinforced gear bearing for screwing made of rubber shore hardness 68 (original is 55-60)

€30.99*
Artikelnummer: 1082
Reinforced Engine Mounting Bearing Front VW Golf MK1 Scirocco Caddy Jetta 171 199 339 Shore Hardness 70
  • ✓ reinforced engine mounting bearing for the front, made of rubber shore hardness 70 (original is 55-60)

€14.89*
Artikelnummer: 1083
Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Golf 1 Scirocco Caddy Jetta 171 199 214G 74,5mm Ø Shore Hardness 68
  • ✓ reinforced engine mounting / engine bearing for Golf MK1 with 74mm external diameter and shore Hardness 68

€26.81*
Artikelnummer: 990
Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Golf MK1 Scirocco Caddy Jetta 74mm Ø Shore Hardness 68
  • ✓ reinforced engine mounting / engine bearing for Golf MK1 with 64,4mm external diameter with shore Hardness 78

€20.54*
Artikelnummer: 583
You can find out everything about your order via your -> View customer account