2x VW T4 Bus Kasten 1.9 TD 2.5 TDI Syncro 2.8 VR6 brake discs Zimmermann 280x24 600.3213.20

Disc brake adapter to convert the T3 BUS to brake discs on the rear axle of the T4. The holders are made of high-strength steel, completely galvanized. With these adapters, both T4 brake discs, i.e. both the 280 and the 294 brake discs with T4 brake calipers can be used. When buying the components, you only have to make sure that if you want to install the 280 brake disc, for example, you also use the brake calipers and brake caliper carrier that were originally installed with this brake disc. Advantages of this brake system: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Quick and easy assembly possible with the supplied screws The wheel hubs must be turned off for the rear disc or can also be ordered from us. Required material for installation: Brake discs from VW BUS T4 280x12 mm 15 inch VAG: 7D0 615 601  or for 16 inch 294x13.5 OE numbers: 7D0615601C Brake caliper bracket from VW BUS T4 280x12 mm 15 inch VAG:7D0615425B oor for 16 inch OE number: 7D0615425A Brake calipers from the VW BUS T4 15 inch OE number: 7D0 615 424B or for 16 inch OE number: 7D0 615 424A Longer studs for the rear axle The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721  Suitable adapters for the front axle are also available from us. Scope of delivery: 2x conversion adapter for VW T3 to T4 brake discs for the rear axle Set of matching centering rings Complete set of high resistant srews Certificate of material Copy of the german document 'Fahrzeugschein' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities.

Brake disc adapter on T3 bus model for conversion to T4 brake disc, rear axle. With these adapters, both T4 brake discs, 280 and 294 , can be mounted with the T4 caliper. Just be careful when buying components: if you want to install, for example, the 280 brake discs, you have to use the original brake calipers and the original brake caliper mounting brackets for the 280 brake discs. Advantages: top deceleration compared to the undersized original brake system the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Completely new wheel hubs with wheel bolts included Required components: Brake discs from VW BUS T4 280x12 mm 15 inch VAG: 7D0 615 601  or for 16 inch 294x13.5 OE numbers: 7D0615601C Brake caliper bracket from VW BUS T4 280x12 mm 15 inch VAG:7D0615425B or for 16 inch OE number: 7D0615425A Brake caliper from  VW BUS T4 15 inch OE numbers: 701 615 424 or for 16 inch OE number: 701 615 424A it must be checked whether longer wheel bolts may have to be used for the rear wheel hub, when using e.g. wheel spacers or the rim thickness. The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721 Suitable adapters for the front axle also available from us. Delivery: 2x conversion adapters for VW T3 to T4 brake discs, rear axle Set of matching centering rings high-strength mounting screws 2x wheel hubs material certificate