You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Engine & Gears

For anyone looking to take their vehicle to the next level by optimising performance and reliability, Epytec is the place to go. We offer an extensive range of high-quality engine and transmission components, characterised by our careful development and the use of "Made in Germany" quality. 

With over 15 years of tuning experience, we can guarantee a significant improvement to your driving experience. Our range includes everything from robust transmission parts to powerful engine upgrades, so you'll find everything you need to customise your vehicle to your exact specifications. Whether you want to maximise your car's road performance or boost its performance on the racetrack, we have the right solutions for you. 

Our engine and transmission mounts are not only technically sophisticated, but also make it much easier to get your tuned vehicle MOT-registered, so you can spend less time dealing with bureaucratic hurdles and more time on the road. Discover our wide range of products on Epytec now and give your car the personalised touch it deserves. 

Whether you're an amateur racer, a performance optimisation enthusiast or just someone who wants to get the best out of their vehicle, you'll find the right components to take your car to the next level at Epytec.

Flywheel Kit Sinter Golf MK1 MK2 MK3 MK4 Corrado Passat G60 GTI 16V 20V Flywheel Clutch Pressure Plate
  • flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ

€789.89*
Artikelnummer: 627-BAS
Bearing Bracket Gear Mounting Bracket Rear 171 399 141 A VW Golf MK1 Caddy Scirocco G60 VR6 1,8T AGU Engine Conversion Gearbox Support 02J 02A CDA
  •  bearing block / bracket,  gear mounting brakcet for Golf MK1 Jetta Scirocco Caddy 14d

€112.26*
Artikelnummer: 509
Reinforced Engine Mounting Bearing Front VW Golf MK1 Scirocco Caddy Jetta 171 199 339 Shore Hardness 70
  • reinforced engine mounting bearing for the front, made of rubber shore hardness 70 (original is 55-60)

€14.89*
Artikelnummer: 1083
CDA VW Gearbox Mounting Bracket Golf MK1 Caddy G60 VR6 1.8T Engine Conversion
  • for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • gearbox: CDA, CTM and DPA

€92.34*
Artikelnummer: 721
VW Gearbox Mounting Bracket Cable Gearbox Golf MK1 Caddy G60 VR6 1,8T Engine Conversion Gearbox

Gearbox mounting bracket kit, in order to install a control cable gearbox 02A for conversion to VR6 or G60 engine in Golf 1, Caddy 14d, Scirocco Jetta 1 & 2.

€86.43*
Artikelnummer: 539
Bracket Mechanical Clutch Golf Scirocco Caddy 1 G60 VR6 1,8T 02A Gearbox

Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.

€132.58*
Artikelnummer: 495

Nothing found?

We can get and make it for you!
02M 02Q 6 Speed 02J 02A 5 Speed Gearbox Manual Transmission Slide Sliding Piece
  •  sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J  5 speed manual gearbox, e.g on VW Golf MK4 R32 models

€62.92*
Artikelnummer: 775
VW Audi 02M 6-Speed Transmission Gearbox Reinforcing Plate Bracket Angle Drive
  • reinforcing bracket / plate made of high-strength  S355 steel
  • VW Audi 02M 6-speed gearbox, angle drive

€116.85*
Artikelnummer: 836
VW Golf MK3 Corrado Haldex Rear Axle Differential Conversion Kit VR6 Turbo 4Motion 16V
  • conversion kit to convert the Syncro rear axle of Golf Corrado and Vento MK3 to the Haldex differential from S3 R32 TT, etc

€237.61*
Artikelnummer: 598
VW Golf MK1 Caddy Scirocco Jetta VR6 R32 Wngine Mounting Bracket Engine Conversion Engine
  • for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jettaa
  • engine: Base Golf 3 VR6
  • transmission: 5-speed 02A/02J from Golf 3 and 4
  • right front engine mounting bracket

€73.69*
Artikelnummer: 183-T3
VW Golf 1 Caddy Scirocco Jetta VR6 R32 Mounting Bracket Gearbox Conversion Engine Support Mount
  • gearbox mounting bracket for the VR6 engine conversion in connection with the 02A 02J 5-speed transmission in VW Golf MK1 / Caddy 14d / Scirocco Jetta 1 & 2

€49.28*
Artikelnummer: 183-T2
VW Cable Gearbox Mounting Bracket Golf MK1 Caddy G60 VR6 1,8T 02 J Engine Conversion VR6 Holder
  • for Golf Mk1 series, e.g. Cadyy 14d Corrado Scirocco Jetta
  • gearbox: 5-speed 02A/02J from base Golf MK3 and MK4, combined with the VR6 engine

€87.28*
Artikelnummer: 829
Tube inner diameter 64mm Ø Engine bracket Golf Scirocco Caddy 1 Gearboc cradle Tube Motor holder

Any kind of engine conversion is possible on your vehicle with this universal high resistant tube.
Tailor-made for engine support typ Golf 1 OENr.: 171 199 214 G
With outer diameter of 64mm

€20.99*
Artikelnummer: 449
6-speed Gearbox Mounting Bracket 02Q for Golf MK1 Scirocco Caddy 14d G60 16V 1,8T 1,9TDI Gearbox Support 4-cylinder
  • for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • VAG 4-cylinder engines from 1,8T G60 1.9TDI
  • gearbox: 6-speed 02Q based on Golf 5

€199.45*
Artikelnummer: 1055
New
VW Golf 1 Caddy Scirocco Conversion Kit to Hydraulic Clutch Engine Conversion Golf 4
  • conversion kit to hydraulic clutch from Golf MK4
  • suitable for Golf MK1,Caddy 14D, Scirocco, etc

€76.18*
Artikelnummer: 964
New
Conversion Kit for VW Golf 1 Caddy Scirocco Umbausatz to Hydraulic Clutch Engine Conversion 1,8T Golf 4
  • conversion kit to hydraulic clutch Golf MK4
  • suitable for VW Golf 1, Caddy 14D, Scirocco  usw.

€168.14*
Artikelnummer: 977
New
Golf MK1 Caddy Scirocco Conversion Set 1,8T 1,9TDI Golf 4 5-speed Gearbox 02A 02J Pedals Hydraulic Clutch
  • suitable for VW Golf MK1, Scirocco und Caddy 1
  • complete conversion set to convert to the 02A / 02J gearbox, combined with the 1,8T / 1,9TDI engine from VW Golf MK4

€452.33*
Artikelnummer: 547
Gearbox Mounting Bracket Golf 1 Caddy 1.8 T 02A Gearbox Engine Bracket Set
  • for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
  • Engine: Basis Golf 4 Audi A3 etc.
  • Gearbox: 5-speed 02A / 02J based on Golf 3 and 4

€131.85*
Artikelnummer: 323
Passat Golf Corrado Vento Modification Motor cradle in steel VR6 Motor holder Motor exchange

Reinforzed motor cradle for engine exchange.For installation of engine typ VW VR6 on Passat Golf Corrado Vento

€154.90*
Artikelnummer: 447
BMW E30 Engine cradle Conversion V8 M60 M62 S62 Engine conversion

BMW E30 E36 Z3 Engine cradle. Allows the installation of a V8 M60 M62 S62 engine.

€116.99*
Artikelnummer: 461
VR6 02a G60 direct gearstick cable replaced by aluminium bushing Gearshift bracket Gearshift cable 57 711 969A replaces rubber bushing
  • Aluminium bushing for Golf VR6 02a G60 cable gearstick

€34.99*
Artikelnummer: 1109
Engine Support Engine Mounting Bracket Golf Mk2 Front Conversion 6-cylinder Engine VR6 02M 6-speed 02A 02J 5-speed Gearbox
  • Engine holder for Golf 2 3 Passat Corrado Vento to install the VR6 engine with 5-speed 02a 02j or 6-speed 02m transmissions

€155.44*
Artikelnummer: 799
Adapter Nipple Hose Conversion Hydraulic Clutch VW Golf MK1 MK2 MK3 Slave Cylinder 16V G60 02A 02J 02M Gearbox 357721261A
  • nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

€40.00*
Artikelnummer: 1090
Engine Mounting Bracket 02M 6-speed Gearbox FJW Ibiza Polo Fabia for Golf Passat Corrado G60 16V Vr6 Gearbox Mounting Bracket
  • for Golf MK2.MK3 series, e.g. Passat Corrado Jetta
  • transmission: 6-speed 02M based on the Polo Ibiza Fabia FJW

€358.40*
Artikelnummer: 1051
Passat Golf 2 3 Corrado Vento Steel VR5 Engine Mounting Support Turbo Compressor Conversion
  • engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine

€90.41*
Artikelnummer: 733
VW Golf Mk3 VR6 Pedals Vento Golf Mk4 Conversion Kit to Hydraulic Clutch Transmission Conversion Pedals Golf Mk4 02A 02J 02M Transmission
  • conversion kit to hydraulic clutch Golf Mk4
  • suitable for VW Golf Mk3, Vento, Golf Mk4 Cabrio

€49.16*
Artikelnummer: 1019
Golf MK2 Corrado Passat Conversion Gas Pedal Accelerator Adapter Trottle Control for Golf MK4 DBW R32 V6 TDI 6Q1 723 503 K Accelerator Cable
  • gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine

€72.91*
Artikelnummer: 863
VW Golf MK2 Corrado Passat 35i Gas Pedal Accelerator Adapter Golf MK7 Pedal block Gas electronic
  • accelerator pedal / gas pedal adapter which is required, if you want to install the Golf MK4 Audi TT engines into your Golf MK2, Corrado or Passat 35i

€103.98*
Artikelnummer: 469
Gierbox mounting bracket Golf MK2 MK3 Passat Corrado Jetta Vento R32 VR6 Gierbox Conversion Bracket
  • getriebe / engine mounting bracket for Golf 4 VR6 R32 engion on model Golf MK2  MK3, Vento

€125.03*
Artikelnummer: 960
VW Golf MK 2 Corrado Passat Jetta Conversion Kit to Hydraulic Clutch Engine Conversion Golf MK4
  • conversion kit to hydraulic clutch from Golf MK4
  • suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

€66.41*
Artikelnummer: 918
Gearbox pull cable Mechanical Clutch Golf Scirrocco Caddy 1 G60 VR6 1,8T 02A Gearbox

Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.

€51.03*
Artikelnummer: 498
Lightened Flywheel 6 Hole BMW N54 Engine E90 E92 E82 E71 E89 1M 135i 335i 335ix xDrive light steel
  • for BMW N54 engines 6 holes installed in:
    • BMW 3er 335i 335ix 335i xDrive ( E90 E91 E92 ) 
    • BMW 3er 335i ( E93 )
    • BMW 1er Coupe 135i M ( E82 )
    • BMW 1er Cabrio 135i ( E88 )
    • BMW X6 xDrive 35i ( E71, 72 )
    • BMW Z4 sDrive 35i sDrive 35is ( E89 )
  • total weight: 8,9 kg / saving weight compared to the original: 5,1 kg

€319.82*
Artikelnummer: 772
Flywheel Kit Sinter BMW 5 Series Touring E34 BMW 3 Series Coupe Cabrio E36 Flywheel Clutch Pressure Plate
  • flywheel kit consisting of lightened flywheel, spring sinterpad clutch disc and pressure plate with reinforced design
  • suitable for:
    • BMW 5 series 520i 24V, 525i 24V, 525iX 24V ( E34 ) 
    • BMW 5 series  Touring 520i, 525i, 525ix ( E34 )
    • BMW 3 series 320i, 325i ( E36 )
    • BMW 3 series  Coupe 320i, 325i, 325is ( E36 )
    • BMW 3 series Cabrio 320i, 325i ( E36 )

€605.77*
Artikelnummer: 645-set
Pressure Plate Clutch Reinforced Opel 2,0l 16V c20xe Kadett Corsa Vectra Astra Ascona Manta 228mm SACHS
  • reinforced Sachs Motorsport pressure plate for Opel 2,0l 16V c20xe Kadett Corsa Vectra Astra Ascona Manta 228mm
  • exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate

€323.15*
Artikelnummer: SAP114
Pressure Plate Clutch Reinforced BMW 535i M5 E28 M88 Engine 240mm SACHS
  • reinforced Sachs Motorsport pressure plate for BMW 535i M5 E28 M88 engine
  • exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate

€417.10*
Artikelnummer: SAP132
Clutch BMW E82 E88 E89 E90 E91 E92 E93 N54 N 52 Engine 6-hole 8-hole 240mm EPYTEC Clutch Disc Ceramic Torsion-damped Sinter
  • 1x clutch disc 240mm suitable for BMW E82 E88 E89 E90 E91 E92 E93 N54 N52 engine 6-hole 8-hole
  • transmittable torque [Nm]: 600
  • diameter [mm]: 240;
  • number of teeth: 22
  • hub profile: 26x29-22N
  • torsion spring clutch disc with sinterpad clutch coating/lining

€121.87*
Artikelnummer: 806
Clutch BMW E30 E36 M40 M42 engines 210mm EPYTEC Clutch Disc Ceramic Torsion Damped Sinter
  • 1x clutch disc 210mm suitable for BMW E30 E34 E36 M40 M42 engines without air conditioning
  • transmittable torque [Nm]: 600
  • diameter [mm]: 210
  • number of teeth: 10
  • hub profile: 23x29-10N
  • torsion spring clutch disc with sinterpad clutch coating/lining

€160.74*
Artikelnummer: 811
Corsa B Tigra A 16V C20XE C20NE Modification Motor cradle Motor holder Motor exchange

Motor cradle for engine exchange.For installation of engine Opel 8V & 16V typ C20Xe C20Ne C20LET X18XE X20XEV on Corsa B Tigra A.

€155.99*
Artikelnummer: 391
Manta Ascona Kadett 16v c20xe C20ne Conversion Engine Engine Mounting Bracket Holder
  • for Manta B, Ascona B, Kadett C
  • engine: 2,0l OHC 16V and 8V (C20NE , C20XE)

€165.63*
Artikelnummer: 535
Gearbox Mounting Bracket WBX for all VW T3 Bus Diesel 251399201K
  • for all VW TR3 buses, YoC 1979-1992
  • combined with all 4 and 5 speed gearboxes

€110.48*
Artikelnummer: 140-Sonder
New
VW Cable Gearbox Mounting Bracket Lupo Polo 6N 1,8T 02M 6-speed Gear Engine Conversion
  • engine mounting bracket for 1,8 2,0l engine from Audi A3 Golf MK4
  • 1x kit 02M 6-speed gearbox mounting bracket for VW Polo 6n Lupo
  • 1x pendulum support adapter

€208.92*
Artikelnummer: 426-6Gang
New
VW Cable Gearbox Mounting Bracket Lupo Polo 6N 1,8T 02J/A Cable Gear Engine Conversion Support
  • 1x engine mounting bracket for 1,8 2,0l from Audi A3 Golf 4 engine
  • 1x kit 02A / 02J 5-speed gearbox mounting bracket for VW Polo 6N Lupo
  • 1x pendulum support adapter

€197.67*
Artikelnummer: 426
Golf MK4 MK3 VR6 Audi A3 1.8T Clutch Cable Aluminum Bush Direct Circuit
Aluminum bush / bushing for Golf MK4 1,8T  gear control cable 

€26.32*
Artikelnummer: 111
Reinforcement Plate VW / Audi G60 16V Turbo 1,8T Golf Reinforcing Plate ABF KR PL
  • block reinforcement plate for all VW / Audi 1.8 liter 16V, G60, 1.9TDI and turbo / compressor engines with oil pump drive via auxiliary shaft
  • for the following engines: MKB. PL, KR, 9A, 6A, ,AFN ABF, PG, 1H, DX, EG

€170.83*
Artikelnummer: 223
Reinforcing Plate Engine Cylinder Block Vr6 VW VR6 Turbo Golf R32 MK1 MK2 MK3 MK4
  • reinforcing plate for all VW VR6 R32 und VR6 turbo / chager engines

€198.20*
Artikelnummer: 602
VR6 Manifold heat shield Turbo

€40.26*
Artikelnummer: 599

Fixation Brake hose Brake system Bracket with borehole

Fastening bracket for brake hose.

€13.78*
Artikelnummer: 454
VW Golf Audi A3 Passat Seat Skoda Opel Steering stop limiter Steering stop limiter Steering rod stainless steel
  • Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles

€42.83*
Artikelnummer: 1111-T10
VW Golf Audi A3 Passat Seat Skoda Opel Steering stop limiter Steering stop limiter Steering rod stainless steel
  • Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles

€41.52*
Artikelnummer: 1111-T1
Brake Line Screw Adapter to M10x1 M10x1 Braking Force Regulator
  • brake line screw adapter, suitable for internal thread M10x1,0 to internal thread M10x1,0

€15.99*
Artikelnummer: 622
Hub Centric Ring Golf Corrado G60 VR6 16V Corrado Rear Axle Brake System R32 S3
  • hub centric ring for brake disc
  • internal diameter: 57,10 mm
  • external diameter: 65,00 mm

€24.99*
Artikelnummer: 343-RI-1X
VW Golf Audi A3 Passat Seat Skoda Opel Steering stop limiter Steering stop limiter Steering rod stainless steel
  • Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles

€41.85*
Artikelnummer: 1111-T6
Blanking Plug Sealing Plug Brake Caliper M10x1 Brake Line Lock Brake Conversion VM Audi Seat Opel Porsche Black Anodized Aluminum
  • blanking / lock / sealing plug made of aluminum black anodized for all brake calipers with M10x1 thread

€8.19*
Artikelnummer: 776
VW Golf Audi A3 Passat Seat Skoda Opel Steering stop limiter Steering stop limiter Steering rod stainless steel
  • Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles

€47.09*
Artikelnummer: 1111-T23
%
Steering Angle Limiter Turning Angle Reducer Stainless VW Golf Audi A3 Opel Steering Bar- Diameter: 32mm - Thickness : 8mm
  • steering angle limiter / turning angle reducer

€52.68* €127.31* (58.62% saved)
Artikelnummer: 293-D328-sale141221
  • Lochkreisadapter bestellt. passen einfach mega gut. top Qualität

    Stephan Eznats aus Facebook

  • Habe Lochkreisadapter gekauft: Super Beratung, Top Qualität, alles bestens!

    Timo Schwierzeck von Google

  • Schnelle Lieferung, wie immer alles sehr passgenau und gut durchdacht. mehr gibt`s hier nicht zu sagen. Absolut Empfehlenswert, egal bei welchem Umbau.

    Roy Müller von Google

  • Echt super Passgenauigkeit und schnelle Lieferung zu Fairen Preisen!!

    Philipp Steiner aus Facebook

  • Beste Adresse für spezial Adapter. Habe Lochkreisadapter von 4x100 auf 5x120 bestellt. Diese waren nach 3 Werktagen da und passten perfekt. Wenns speziell und top Qualität sein soll dann epytec. Werde immerwieder gerne bei diesem kompetenten und schnellem Team bestellen.

    Günter Sölch von Google

  • Ich bin super zufrieden mit den Teilen von epytec. Gut verpackt, tolle Qualität und das ganze macht den TÜV Prüfer auch noch glücklich. Man findet viele etwas spezielle teile. Wirklich toll.

    Jasmin W von Google

You can find out everything about your order via your -> View customer account