Engine & Gears
- for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- Engine: Basis Golf 4 Audi A3 etc.
- Gearbox: 5-speed 02A / 02J based on Golf 3 and 4
High resistant rubber bearing kit for engine and gearbox.For installation on Golf 1. Perfect for motor conversion on VR6 or V16 engine.
Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.
- nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
- setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage
- gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine
- for all G60 GTI 16V / TDI engines
- e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
- suitable for Golf MK2, VW Jetta, Corrado and Passat 35i
- for Golf MK2 and MK3 for exeample Corrado Jetta Passat
- conversion to mechanical clutch
- for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
- Engine: base Golf 3, Golf 4 Audi A3 etc..
- Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4
- 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.
- reinforced clutch release lever for all 02A and 02J 5 speed gear
Short shifter in stainles steel.Tailor-made for VW vehicles with cylinder capacity from 1,5 ltr on as Golf 1, Jetta 1, Caddy 14d , Scirocco 1 and 2.
- for all BMW with M50 M52 and M54 engines installed in:
- BMW 3 Series 320i 325i 323i 328i ( E36 )
- BMW 3 Series Compact 323ti ( E36 )
- BMW 3 series coupe 320i 323i 325i 325is 328i ( E36 )
- BMW 3 series convertible 320i 323i 325i 328i ( E36 )
- BMW 3 Series Touring 320i 323i 328i ( E36 )
- BMW 3 Series 320i 323i 325i 325xi 328i 330i 330xi ( E46 )
- BMW 3 Series Compact 325ti ( E46 )
- BMW 3 Series Coupe 320Ci 323Ci 325Ci 328Ci 330Ci 330xi ( E46 )
- BMW 3 Series Convertible 320Ci 323 Ci 325Ci 330Ci ( E46 )
- BMW 3 series Touring 320i 325i 325xi 328i 330i 330xi ( E46 )
- BMW 5 series 520i 523i 525i 528i 530i ( E39 )
- BMW 5 series Touring 520i 523i 525i 528i 530i ( E39 )
- BMW 5 series 520i 24V 525i 24V 525ix 24V ( E34 )
- BMW 5 series Touring 520i 525i 525ix ( E34 )
- BMW 5 series 520i 525i 530i ( E60 )
- BMW 5 series Touring 525i ( E61 )
- BMW 7 series 728i,iL ( E38 )
- BMW 7 series 730i, Li ( E65 E66 )
- BMW Z3 2.0i 2.8i ( E36 )
- BMW Z4 2.2i 2.5i 3.0i ( E85 )
- BMW X3 2.5i 3.0i xDrive ( E83 )
- Total weight: 5,8 kg / Savings compared to original: 6,2 kg
- gas pedal / accelerator pedal adapter / trottle control adapter
- Golf MK1 Caddy Scirocco
- conversion kit to hydraulic clutch Golf MK4
- suitable for VW Golf 1, Caddy 14D, Scirocco usw.
- reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento
- engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento
- for all VW T2, T3 bus
- engine: to 1,9l TDI (90PS) 1Z
- for all VW T2, T3 bus transporter
- engine: to 1,9l TDI (116 HP) AFN
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A for conversion to VR6 or G60 engine in Golf 1, Caddy 14d, Scirocco Jetta 1 & 2.
- gearbox adapter plate for VW T3 transporter / van to install a 012 Audi / Passat 5-speed gearbox
Engine and gearbox mounting bracket kit, in order to install a control cable gearbox 02A/02J for conversion to VR6 or G60 engine im Golf MK1, Caddy 14d, Scirocco Jetta 1 & 2.
Motor cradle for engine exchange.For installation of 1,8T engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.
- conversion kit to hydraulic clutch Golf Mk4
- suitable for VW Golf Mk3, Vento, Golf Mk4 Cabrio
- for Golf MK1 series, also Caddy 14d Corrado Scirocco Jetta
- engine: 4 cylinder engines, basis from Golf MK3 and MK4
- sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J 5 speed manual gearbox, e.g on VW Golf MK4 R32 models
- for all BMW M40 and M42 engines
- e.g BMW E30, E34, E36 without air con
- total weight: 4,8 kg / saving weight compared to the original: 7,2 kg
- for BMW M50 engines with 228 mm clutches installed in:
- BMW 5er 520i 24V, 525i 24V, 525iX 24V ( E34 )
- BMW 5er Touring 520i, 525i, 525ix ( E34 )
- BMW 3er 320i, 325i ( E36 )
- BMW 3er Coupe 320i, 325i, 325is ( E36 )
- BMW 3er Cabrio 320i, 325i ( E36 )
- total weight: 6,6 kg / saving weight compared to the original: 5,4 kg
Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.
- for Golf MK1 Cabrio Caddy 14D
- engine: based on Golf MK3, Golf MK4 Audi A3 etc.
- gearbox: 5 speed 02A/02J/CDA gearbox , based on Golf MK3 and MK4
- conversion kit to hydraulic clutch from Golf MK4
- suitable for Golf MK2, VW Jetta, Corrado and Passat 35i
- suitable for VW Golf MK1, Scirocco und Caddy 1
- complete conversion set to convert to the 02A / 02J gearbox, combined with the 1,8T / 1,9TDI engine from VW Golf MK4
- aluminuim bush for Golf MK3 MK4, cable gearbox
- engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine
- for Golf MK2, MK3, for example Passat Corrado Jetta
- gearbox: 6 spedd 02M, based on Golf MK4 R32 / V6
- gearbox nounting bracket for conversion to DQ250 DSG 6-speed gearbox into the Golf MK2 MK3 Passat Corrado
Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.
- mounting bracket / holder / support for conversion to 012 VW / Audi 5-speed gearbox on model VW T3 transporter
- for all engines-models with 020 gearbox (engine reference: PL, KR)
- e.g VW Golf MK2 16V, VW Scirocco 16V, VW Jetta 16V and Audi 80
- total weight: 2,9 kg / saving weight compared to the original: 2,6 kg
- for BMW E36 and E46
- for conversion to turbocharger
- for all G40 1,3l engines (engine reference: AAU, AAV, NZ, 3F, PY)
- e.g. VW Polo 86c G40 1,3l
- total weight: 2,5 kg / saving weight compared to the original:: 2,9 kg
Fastening bracket for brake hose.
- Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- Bracket Z17 ZR17 ZR18 Z18 6 piston Porsche brake caliper
- sticker EPYTEC size (335mmx100mm)
- Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- Bracket 6 piston Porsche Panamera brake caliper
- Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
-
Lochkreisadapter bestellt. passen einfach mega gut. top Qualität
Stephan Eznats aus Facebook
-
Habe Lochkreisadapter gekauft: Super Beratung, Top Qualität, alles bestens!
Timo Schwierzeck von Google
-
Schnelle Lieferung, wie immer alles sehr passgenau und gut durchdacht. mehr gibt`s hier nicht zu sagen. Absolut Empfehlenswert, egal bei welchem Umbau.
Roy Müller von Google
-
Echt super Passgenauigkeit und schnelle Lieferung zu Fairen Preisen!!
Philipp Steiner aus Facebook
-
Beste Adresse für spezial Adapter. Habe Lochkreisadapter von 4x100 auf 5x120 bestellt. Diese waren nach 3 Werktagen da und passten perfekt. Wenns speziell und top Qualität sein soll dann epytec. Werde immerwieder gerne bei diesem kompetenten und schnellem Team bestellen.
Günter Sölch von Google
-
Ich bin super zufrieden mit den Teilen von epytec. Gut verpackt, tolle Qualität und das ganze macht den TÜV Prüfer auch noch glücklich. Man findet viele etwas spezielle teile. Wirklich toll.
Jasmin W von Google
