Chassis
- 4-piece PU bushing kit for the front axle housing bearing on the rear axle of the BMW E46
- BMW 33316770784, BMW 33311092516, BMW 33316757394
- 4-piece PU bushing kit for the rear axle housing bearing on the rear axle of the BMW E46
- BMW 33 31 6 770 783, BMW 33 31 1 092 515, BMW 33 31 6 757 393
- Axle pivot for Golf 1, Golf 2 and Golf 3 to take over the disc brake system on the rear axle from the Golf 2 G60
- brake / bolt circle/ pitch circle diameter (PCD), conversion kit for front und rear axle
- wheel hub 5x100
- VW Golf MK1 Caddy 14d Jetta and Scirocco
- brake / bolt circle/ pitch circle diameter (PCD) conversion kit for front und rear axle
- wheel hub 5x100
- VW Golf MK1 Caddy 14d Jetta and Scirocco
Tailor-made Wheel hub for for installation of brake disc system on rear axle of VW T3 Bus.
- bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- suspension control arm / wishbone Golf MK4, Audi S3, Audi TT, VW Bora, Seat Leon, etc.
- camber correction / adjustement plates for rear axle of Audi 80 100 A4 A6 to adjust camber and track. With these plates, you can modify the rear camber 2.0 ° negative.
- camber correction plates for installation on rear axle. Allow a perfect camber adjustment on your vehicle.
- camber adjustment plate for rear axle 3mm
- VW Caddy14D
- For front axle VW Golf Mk2 Jetta 2, year of construction up to 07/1987
- camber correction / adjustement plates for rear axle
- suitable for Opel Corsa D, Opel Adam, Fiat Punto, Alfa Mito, Abarth Punto, Punto Evo, Grande Punto
- camber adjustment plate Audi VW Golf 5,6,7 Audi A3 S3 TT Seat Leon Altea Toledo
- Kit of camber correction for the rear axle
- Suitable for : VW, Ibiza 6L, Polo 9N, Audi A1
- conversion kit to convert the VW Golf MK2 MK3 Syncro rear axle. Adjustement of track and camber
- 2x tie rods / wishbones for Audi A4 A5 A6 A7 A8 Q5 and Porsche Macan
- camber adjustable for the rear axle
- these spacers / plates are used to mount brake discs which have a too large overall height and would thus strip on the wheel carrier / bearing.
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- for VW Golf MK 4, Bora 1.6 16V, Audi A3 1.6, Seat Toledo 2 1.6 16V, Skoda Octavia 1 1.9 SDI, etc
- control arm suspension / wishbone with bushing, axle joint and tie / steering rods
- for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
- to rims with PCD : 4x108
- brake disc diameter : 57,,1
- enlargement per wheel : 20mm
- for Audi A4 S4 quattro, Seat Exeo 1.8 T, etc.
- reinforced control arm / suspension / wishbone Kit, complete with steering bars and track rod ends,
- wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD), rear axle on Front WD models like Golf MK 4 Bora Audi A3 TT TTRS RS3 Audi TT
- these spacers are used to install discs that are too large in size or diameter and thus touch the wheel axle.
- for Golf MK3 2.0 Syncro, Golf 4 Cabriolet 2.0, VW Vento 1.9 TDI, etc.
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- 1x drive shaft for Golf Mk5 Mk6 GTI
- suitable for manual gearshift and DSG transmission
- VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- adjustable Uniball wishbone bearing for 3. BMW E30 E36 and M3 models, front axle
- Strut bar / brace made of steel for the front axle, suitable for VW Golf MK1, VW Jetta 1, Scirocco 1 / 2 and VW Caddy 14D
- 2x locking / closing plate (V-bar) to reinforce the suspension in the wheel housing (left and right) of the VW Golf MK1, Scirocco 1 etc.
- Porsche conversion PCD 5x130 for beetle with our wheel hub / hub adapter made of aircraft aluminum suitable for front axle
- brake disc centric: 102,8mm
- rim centric: 71,5mm
- thin and 1 cm shorter drive shaft for VW Golf MK5, Golf MK6, Passat 3C, VW Touran and Audi A3
- wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD), front axle on models Golf MK1, Caddy, Scirocco
- for vehicle with PCD: 5x120 uand hub centric: 72,5
- to brake disc with PCD: 5x120
- brake disc diameter: 79,0
- enlargement by wheel: 12mm
- reinforcing plate for suspension turrets / strut mounts on all models BMW E30, except 4WD
- high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- thin drive shaft for VW Polo, Audi A1, Skoda Fabia Rapid und Seat Ibiza
- high-strength aluminum spacer plates in 9mm thickness with bolt circle / pitch circle 5x100 and 5x112 for Golf Mk4 Polo 6R and much more
- wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD) and ABS sensor ring, front axle on Golf MK 4 Bora Audi A3 TT TTRS RS3 Audi TT models
- right shorter and thinner drive shaft for VR6 / R32 conversion in VW Golf Mk1, Scirocco 1, Jetta, Caddy