Chassis
- suspension control arm / wishbone Golf MK4, Audi S3, Audi TT, VW Bora, Seat Leon, etc.
- bush / bushing / sleeve for the 5th BMW series 520i E9 axle stub , steering rod link, control arm, front left right
Complete kit of repair plates for the support of the rear axle on the body of BMW E46 revealing cracks.
- bush for wishbone / control arm on 5er BMW series E39 axle stub, wheel bearing housing front left right
- bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
- steering angle limiter / turning angle reducer suitable for all BMW E30 and E36
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- repair plate kit for rear axle on model 3th BMW E36
1 complete set of stiffening plates for the reinforcement of the entire Opel Kadett C car body.
- rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4
- Strut bar / brace made of steel for the front axle, suitable for VW Golf MK1, VW Jetta 1, Scirocco 1 / 2 and VW Caddy 14D
- front axle reinforcement plates for all Opel Kadett C models like the original 1000 series
- conversion kit to convert the VW Golf MK2 MK3 Syncro rear axle. Adjustement of track and camber
- drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP
- Volkswagen Caddy 14d lowering kit fo rear axle
- repair / reinforcing plate kit for the control / trailing arm (rear axle), on model 3th BMW E36
- for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
- to rims with PCD : 4x108
- brake disc diameter : 57,,1
- enlargement per wheel : 20mm
- 26-piece polyurethane bushing kit for the front and rear axles of the Golf Mk1 Scirrocco MK1 and 2 Jetta MK1
- wishbone support / suspension control arm bar / strut
- VW Golf MK1 Cabrio Jetta VR6 16V G60
- universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- the reverse direction of installation of the head allows a deeper lowering of the vehicle
- 10-piece polyurethane bushing kit for the rear axle of the Golf MK1 Scirrocco 1 and 2 Jetta 1
- rear axle bearing on both sides
- conversion kit to convert BMW E30 M3 + E36 Z3 group A, rear axle. Adjustement of track and camber
- wheel offset plates for rear axle
- track extension by 10 mm per side
- for VW Polo 6R Polo 9n Audi A1 Seat Ibiza IV V
- Drive shaft set for VW Golf 1, Scirocco Jetta 1 Caddy 14D with the narrow axle .Stable up to 800 hp.
- wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD) and ABS sensor ring, front axle on Golf MK 4 Bora Audi A3 TT TTRS RS3 Audi TT models
- 1x steel strut bar / brace for front axle on models VW Jetta 2, Golf MK2 and Corrado
- camber correction / adjustement plates for rear axle
- suitable for Opel Corsa D, Opel Adam, Fiat Punto, Alfa Mito, Abarth Punto, Punto Evo, Grande Punto
- Repair sheet plate for shock absorbers, spring or axle suspension rear for Audi RS4 S4 RS2 S2 A4
- camber correction plates for installation on rear axle. Allow a perfect camber adjustment on your vehicle.
- for vehicle with PCD : 4x100 and hub diameter / hub centric: 57,1
- rims with P.C.D. : 5x130
- rims diameter : 71,6
- enlargement per wheel: 20mm
- Body reinforcing kit (14-pieces) for Opel Corsa A
- camber eccentric screw for BMW E30 to adjust camber on rear axle
- camber correction / adjustement plates for rear axle of Audi 80 100 A4 A6 to adjust camber and track. With these plates, you can modify the rear camber 2.0 ° negative.
- thin drive shaft for VR6 conversin in VW Golf MK1, Scirocco 1, Jetta, Caddy
- wheel hubs for conversion to 5x112 bolt circle/ pitch diameter circle (pdc) - front axle
- suitable for Audi 80 / 90. Series with an 82 wheel bearing diameter
- Wheel hubs for the conversion to 5x120mm bolt circle / pitch circle for the front axle of the BMW E30
- BMW E30 M3 S14 camber correction / adjustement plate, front axle, +/-0,5